隔磁片(隔磁材料)

隔磁片(隔磁材料)

型号︰ABS-1025

品牌︰ZIC

原产地︰韩国

单价︰-

最少订量︰-

现在查询

产品描述

无线充电器是由220V电源变成一交感电磁场,然后交感电磁场再产生一交感电磁场后,由交感电磁场变成电流充电;交感电磁场遇到金属,则会产品电子涡流,电子涡流会对金属产生趋肤效应,在金属上产生热能,降低了充电效率,浪费电能。且对线路主板干扰而影响整个充电器正常工作。用吸波材料,通过高磁通量,给交感磁场提供回路,可以提高效率。
技术参数
引张强度:4.6Mpa
使用温度:-25~85℃
使用频率:10MHz~8GHz
导热系数:0.6W/mK
粘着强度:>1.0 kgf/inch
含胶厚度:0.2MM~0.5MM
产品规格:300MM*20M
注意事项
吸波材料成品以热缩膜包装,片状或卷状成品以包装袋完成包装,并装于适当之纸箱内。
本产品应放置于阴凉之处所,避免高温高湿或日晒,以妥为保管条件下,品质保证期间为制作出厂六个月内。
以上数据之取得是通过多次测试所得之平均值,使用者须确定此产品是否适用于某一特定用途及是否适用使用者的应用方式。
Absorbing material
Wireless charger is by 220V power source into a sympathetic electromagnetic field, and then sympathetic to produce a sympathetic electromagnetic field, by sympathetic electromagnetic field into current charging, Sympathetic electromagnetic field, it will meet metal products electrons swirling, electrons swirling will produce hasten to metal skin effect, in the metal, produce the heat and reduce the charging efficiency, waste electricity. And on line motherboard interference and affect the entire charger working normally. By absorbing material, through high directed flux, to provide sympathetic magnetic field circuitry, can improve efficiency.
Technical parameters
Lead zhang intensity: 4.6 Mpa
Using temperature: - 25 ~ 85 ℃
Use frequency: 10MHz ~ 8GHz
Coefficient of thermal conductivity: 0.6 W/mK
Adhesion strength: KGF/a > 1.0
Contains gum 0.2 MM thickness: 0.5 MM ~
The product specification: 300MM * 20M
note
Absorbing material
finished with heat shrinkable film packaging, flake or roll shape with complete product packaging bags, and installed in proper cartons.
This product should be placed in a cool place, avoid the wet high temperature or insolation, in return for safekeeping conditions, the quality guarantee period for making factory within six months.
Above data acquisition is through multiple tests of income average, users are certain this product is suitable for a particular purpose and are applicable ways of application of the user.